Knowledge of the state of stability of mining pits is both a basic condition, an essential axis and a safety benchmark for mining operations. This stability is largely based on the knowledge of the rock mass sheltering the mining works and this requires a perfect characterization of all of its structural formations through mapping (manual or digital). The families of discontinuities, namely family 1 (bedding), family 2 (Joint 2) and family 3 (Joint 1) obtained through structural mapping in the Essakane open pit mine, made it possible to analyze the failure modes at the origin of rock instabilities. The respective dips of these different directional families are: 77˚ - 85˚/N 058˚ - 068˚, 66˚ - 74˚/N 133˚ - 143˚, 25˚ - 35˚/N115˚ - 130˚. An average safety factor of 4.3 was estimated for the area with a quality of the rock mass (RMR) estimated at 47. The results obtained reflect on the one hand the risks of instability associated with the quality of the rock mass studied and on the other hand highlights the state of stability of the study area.
References
[1]
Zhang, L. and Einstein, H.H. (2000) Estimating the Intensity of Rock Discontinuities. International Journal of Rock Mechanics and Mining Sciences, 37, 819-837. https://doi.org/10.1016/S1365-1609(00)00022-8
[2]
Kilic, A., Mouza, J. and Arnould, M. (1999) Stability Analysis and Dynamic Solution in Open Pit Mines: Application to Afsin-Elbistan Lignite Mine, Turkey. Bulletin of Engineering Geology and the Environment, 57, 327-336. https://doi.org/10.1007/s100640050055
[3]
Chemmakh, R. (2015) Slope Stability Faculties of Science and Technology. Master Thesis, Guelma University, Guelma, 86 p.
[4]
Abdellah, W.R., Hirohama, C., Sainoki, A., Towfeek, A.R. and Ali, M.A.M. (2022) Estimating the Optimal Overall Slope Angle of Open-Pit Mines with Probabilistic Analysis. Applied Sciences, 12, 4746.
[5]
Basson, F.R.P. (2012) Rigid Body Dynamics for Rock Fall Trajectory Simulation. 46th U.S. Rock Mechanics/Geomechanics Symposium, Chicago, June 2012, Paper No. ARMA-2012-267.
[6]
Khemissa, M. and Rahmouni, Z. (2003) Stability Analysis and Stabilization by Piles of the Slope Unstable of Sidi-Ahmed (Béjaïa, Algeria). Proceedings of the 13th Regional Congress of Mechanics of Soils, Marrakesh, 8-11 December 2003, 163-168.
[7]
Hoek, E., Carranza-Torres, C. and Corkum, B. (2002) Hoek-Brown Failure Criterion Edition. Proceedings of NARMS-TAC Conference, 1, 267-273.
[8]
Tshibubudze, A., Hein, K.A.A. and Marquis, P. (2009) The Markoye Shear Zone in NE Burkina Faso. Journal of African Earth Sciences, 55, 245-256. https://doi.org/10.1016/j.jafrearsci.2009.04.009
[9]
Wyllie, D.C. and Mah, C.W. (2005) Rock Slope Engineering: Civil and Mining. 4th Edition, Taylor & Francis Group, New York.
[10]
SRK Consulting (2015) Geotechnical Stability Analysis of Essakane Mine. Report of activities West and East Wall, Canada, 23-47.
[11]
Rabie, M. (2014) Comparative Study between Traditional Methods and Finite Element Methods for Slopes under Heavy Rain. HBRC Journal, 10, 160-168. https://doi.org/10.1016/j.hbrcj.2013.10.002
[12]
Pahl, P.J. (1981) Estimating the Mean Length of Discontinuity Traces. International Journal of Rock Mechanics and Mining Sciences, 18, 221-228. https://doi.org/10.1016/0148-9062(81)90976-1
[13]
Mathis, J.I. (1987) Discontinuity Mapping—A Comparison between Line and Area Mapping. 6th ISRM Congress, Montreal, August 1987, Paper No. ISRM-6CONGRESS-1987-206.
[14]
Priest, S.D. (1993) Discontinuity Analysis for Rock Engineering. 1st Edition, Chapman & Hall, London. https://doi.org/10.1007/978-94-011-1498-1_1
[15]
Hudson, J.A. and Harrison J.P. (1997) Engineering Rock Mechanics—An Introduction to the Principles, Pergamon, Amsterdam, Lausanne, New York, Oxford, Shannon, Singapore, Tokyo, 231-378.
[16]
Lemy, F. and Hadjigeorgiou, J. (2004) A Digital Face Mapping Case Study in an Underground Hard Rock Mine. Canadian Geotechnical Journal, 41, 1011-1025. https://doi.org/10.1139/t04-046
[17]
Birch, J.S. (2006) Using 3DM Analyst Mine Mapping: Laser and Photogrammetric Methods for Face Characterization. American Rock Mechanics Association, Golden, Colorado.
[18]
Krosley, L.K., Shaffner, P.T., Oerter, E. and Ortiz, T. (2006) Digital Ground-Based Photogrammetry for Measuring Discontinuity Orientations in Steep Rock Exposures. Proceedings of the 41st U.S. Rock Mechanics Symposium, ARMA, Golden, June 2006, Paper No. ARMA-06-1026.
[19]
Mathis, J.I. (2011) Photogrammetric Discontinuity Mapping as Applied to Structural Interpretation and Drillhole Planning at Barrick’s Williams Pit. Proceedings of the International Symposium on Rock Slope Stability in Open Pit Mining and Civil Engineering (Slope Stability 2011), Canadian Rock Mechanics Association.
[20]
Wang, S.S. (2011) Characterization of Rock Spatial Modeling and Quick Identification of Unstable Blocks Based on a Digital Photogrammetry. Geotechnical Special Publication, 220, 259-267.
[21]
Gaich, A., Pötsch, M. and Schubert, W. (2006) Basics and Application of 3D Imaging Systems with Conventional and High-Resolution Cameras. Rock Mechanics Symposium, U.S. Golden, Colorado.
[22]
Martin, C.D., Tannant, D.D. and Lan, H. (2007) Comparison of Terrestrial-Based, High Resolution, Lidar and Digital Photogrammetry Surveys of a Rock Slope. Proceedings of the 1st Canada-US Rock Mechanics Symposium, Vancouver, May 2007, Paper No. ARMA-07-005.
[23]
Haneberg, W.C. (2008) Using Close Range Terrestrial Digital Photogrammetry for 3-D Rock Slope Modeling and Discontinuity Mapping in the United States. Bulletin of Engineering Geology and the Environment, 67, 457-469. https://doi.org/10.1007/s10064-008-0157-y
[24]
Sturzenegger, M. and Stead, D. (2009) Close-Range Terrestrial Digital Photogrammetry and Terrestrial Laser Scanning for Discontinuity Characterization on Rock Cuts. Engineering geology, 106, 163-182. https://doi.org/10.1016/j.enggeo.2009.03.004
[25]
Dubois, E. and Grenon, M. (2012) Structural Characterization Using Photogrammetry: Kikialik Mine, Nunavik. Proceedings of TAC 2012 Tunnels and Underground Spaces: Sustainability and Innovations Conference, Montreal, 17-20 October 2012, 102-115.
[26]
Closset, L. and Wojtkowiak, F. (1993) Geotechnics Applied to the Safety of Opencast Mining of Alluvial Land. BRGM.
