Managing agricultural waste and expanded polystyrene (EPS) poses significant environmental and economic challenges. This study aims to create composites from millet husks, rice husks, and recycled EPS, using a manufacturing method that involves dissolving the polystyrene in a solvent followed by cold pressing. Various particle sizes and two binder dosages were investigated to assess their influence on the physico-mechanical properties of the composites. The mechanical properties obtained range from 2.54 to 4.47 MPa for the Modulus of Rupture (MOR) and from 686 to 1400 MPa for the Modulus of Elasticity in Bending (MOE). The results indicate that these composites have potential for applications in the construction sector, particularly for wood structures and interior decoration. Moreover, surface treatments could enhance their durability and mechanical properties. This research contributes to the valorization of agricultural and plastic waste as eco-friendly and economical construction materials.
References
[1]
Zareei, S.A., Ameri, F., Dorostkar, F. and Ahmadi, M. (2017) Rice Husk Ash as a Partial Replacement of Cement in High Strength Concrete Containing Micro Silica: Evaluating Durability and Mechanical Properties. Case Studies in Construction Materials, 7, 73-81. https://doi.org/10.1016/j.cscm.2017.05.001
[2]
Adesina, P.A. and Olutoge, F.A. (2019) Structural Properties of Sustainable Concrete Developed Using Rice Husk Ash and Hydrated Lime. Journal of Building Engineering, 25, Article ID: 100804. https://doi.org/10.1016/j.jobe.2019.100804
[3]
Li, Q. and Song, Z. (2023) Prediction of Compressive Strength of Rice Husk Ash Concrete Based on Stacking Ensemble Learning Model. Journal of Cleaner Production, 382, Article ID: 135279. https://doi.org/10.1016/j.jclepro.2022.135279
[4]
Amulah, N.C., El-Jummah, A.M., Hammajam, A.A. and Ibrahim, U. (2022) Experimental Investigation on the Thermal Properties of Gypsum Plaster-Rice Husk Ash Composite. Open Journal of Composite Materials, 12, 131-138. https://doi.org/10.4236/ojcm.2022.124010
[5]
Bheel, N., Awoyera, P., Shar, I.A., Abbasi, S.A. and Khahro, S.H. (2021) Synergic Effect of Millet Husk Ash and Wheat Straw Ash on the Fresh and Hardened Properties of Metakaolin-Based Self-Compacting Geopolymer Concrete. Case Studies in Construction Materials, 15, Article ID: e00729. https://doi.org/10.1016/j.cscm.2021.e00729
[6]
Auta, S.M., Shiwua, A.J. and Tsado, T.Y. (2015) Compressive Strength of Concrete with Millet Husk Ash (MHA) as Partial Replacement for Cement. Magazine of Civil Engineering, 59, 74-79. https://doi.org/10.5862/MCE.59.8
[7]
Mohammed, A., Aboshio, A. and Aliyu, M.M. (2021) Performance of Millet Husk Ash in Self Compacting Concrete. Nigerian Journal of Technology, 40, 1010-1017. https://doi.org/10.4314/njt.v40i4.20
[8]
Gairola, S., Sinha, S. and Singh, I. (2022) Novel Millet Husk Crop-Residue Based Thermoplastic Composites: Waste to Value Creation. Industrial Crops and Products, 182, Article ID: 114891. https://doi.org/10.1016/j.indcrop.2022.114891
[9]
Abba, H.A., Zahari, I.N., Sapuan, S.M. and Leman, Z. (2017) Characterization of millet (Pennisetum glaucum) Husk Fiber (MHF) and Its Use as Filler for High Density Polyethylene (HDPE) Composites. Bioresources, 12, 9287-9301. https://doi.org/10.15376/biores.12.4.9287-9301
[10]
Abdulkareem, S.A. and Adeniyi, A.G. (2018) Tensile and Water Absorbing Properties of Natural Fibre Reinforced Plastic Composites from Waste Polystyrene and Rice Husk. ABUAD Journal of Engineering Research and Development, 1, 199-204.
[11]
Choi, N.-W., Mori, I. and Ohama, Y. (2006) Development of Rice Husks—Plastics Composites for Building Materials. Waste Management, 26, 189-194. https://doi.org/10.1016/j.wasman.2005.05.008
[12]
ASTM D1037-12 (2020) Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials, American Society for Testing and Materials. https://doi.org/10.1520/D1037-12R20
[13]
Oh, Y.S. and Yoo, J.Y. (2011) Properties of Particleboard Made from Chili Pepper Stalks. Journal of Tropical Forest Science, 23, 473-477.
[14]
Abdulkareem, S.A. and Adeniyi, A.G. (2017) Production of Particle Boards Using Polystyrene and Bamboo Wastes. Nigerian Journal of Technology, 36, 788-793. https://doi.org/10.4314/njt.v36i3.18
[15]
Ghalehno, M.D., Nazerian, M. and Bayatkashkoli, A. (2013) Experimental Particleboard from Bagasse and Industrial Wood Particles. International Journal of Agriculture and Crop Sciences (IJACS), 5, 1626-1631.
[16]
Adeniran, A.T. (2021) Properties of Particleboard Made from Recycled Polystyrene and Cocos Nucifera Stem Particles. Open Journal of Agricultural Research, 1, 1-7. https://doi.org/10.31586/ojar.2021.010101
[17]
Akinyemi, B.A., Okonkwo, C.E., Alhassan, E.A. and Ajiboye, M. (2019) Durability and Strength Properties of Particle Boards from Polystyrene—Wood Wastes. Journal of Material Cycles and Waste Management, 21, 1541-1549. https://doi.org/10.1007/s10163-019-00905-6
[18]
Chiang, T.C., Osman, M.S. and Hamdan, S. (2014) Water Absorption and Thickness Swelling Behavior of Sago Particles Urea Formaldehyde Particleboard. International Journal of Science and Research, 3, 1375-1379.
