Zirconia ceramics have become increasingly widely used in recent years and are favored by relevant enterprises. From the traditional dental field to aerospace, parts manufacturing has been used, but there is limited research on the deformation and damage process of zirconia ceramics. This article analyzes the acoustic emission characteristics of each stage of ceramic damage from the perspective of acoustic emission, and explores its deformation process characteristics from multiple perspectives such as time domain, frequency, and EWT modal analysis. It is concluded that zirconia ceramics exhibit higher brittleness and acoustic emission strength than alumina ceramics, and when approaching the fracture, it tends to generate lower frequency acoustic emission signals.
References
[1]
El-Ghany, A.S.O. and Sherief, H.A. (2016) Zirconia Based Ceramics, Some Clinical and Biological Aspects: Review. Future Dental Journal, 2, 55-64. https://doi.org/10.1016/j.fdj.2016.10.002
[2]
Zhang, X., Wu, X. and Shi, J. (2020) Additive Manufacturing of Zirconia Ceramics: A State-of-the-Art Review. Journal of Materials Research and Technology, 9, 9029-9048. https://doi.org/10.1016/j.jmrt.2020.05.131
[3]
Zhu, Y., Liu, K., Deng, J., et al. (2019) 3D Printed Zirconia Ceramic Hip Joint with Precise Structure and Broad-Spectrum Antibacterial Properties. International Journal of Nanomedicine, 14, 5977-5987. https://doi.org/10.2147/IJN.S202457
[4]
Ivan, G., Elka, R. and Todor, U. (2021) Possibilities of Improving the Shear Strength between Different Type of Cement and Zirconia Ceramics: Literature Review. Journal of IMAB, 27, 3557-3563. https://doi.org/10.5272/jimab.2021271.3557
[5]
Gjurin, Z.S., Özcan, M. and Oblak, C. (2019) Zirconia Ceramic Fixed Partial Dentures after Cyclic Fatigue Tests and Clinical Evaluation: A Systematic Review. Advances in Applied Ceramics, 118, 62-69. https://doi.org/10.1080/17436753.2018.1507428
[6]
Dou, Y.X., Luo, S.H., Zhang, X., et al. (2023) Research Progress on Toughening Mechanism and Powder Preparation of Zirconia Ceramics. Materials Introduction, 37, 134-139.
[7]
Yan, J.Y., Guo, X.Y., Zhang, Y., et al. (2023) Research Progress on Doping Modification and Toughening Enhancement of Zirconia Based Structural Ceramics. Contemporary Chemical Research, 2, 174-178.
[8]
Xu, J., He, J., Xu, S., et al. (2018) Grinding Characteristics, Material Removal, and Damage Formation Mechanisms of Zirconia Ceramics in Hybrid Laser/Grinding. Journal of Manufacturing Science and Engineering, 140, Article ID: 071010. https://doi.org/10.1115/1.4039645
[9]
Omar, B.F., Abhishek, S., Golam, K., et al. (2021) Parametric Study of Surface Characteristics of Laser Micro-Channel Milling of Zirconia (ZrO2) at Defocused Condition. Materials Today: Proceedings, 47, 2288-2292. https://doi.org/10.1016/j.matpr.2021.04.222
[10]
Nasiry, L.K., Alma, R.S., Ali, T. and Zandinejad, A. (221) Additive Manufacturing of Zirconia Ceramic and Its Application in Clinical Dentistry: A Review. Dentistry Journal, 9, Article 104. https://doi.org/10.3390/dj9090104
[11]
Zhang, Z.L., Zhou, H.M., Feng, M., et al. (2023) Process Optimization of Magnetic Composite Fluid Polishing of Zirconia Ceramics. Diamond and Absolute Engineering, 43, 712-719. http://www.jgszz.cn/article/doi/10.13394/j.cnki.jgszz.2023.0003
[12]
Russo, S.D., Cinelli, F., Sarti, C. and Giachetti, L. (2019) Adhesion to Zirconia: A Systematic Review of Current Conditioning Methods and Bonding Materials. Dentistry Journal, 7, Article 74. https://doi.org/10.3390/dj7030074
[13]
Farhad, T. (2019) Color Aspect of Monolithic Zirconia Restorations: A Review of the Literature. Journal of Prosthodontics, 28, 276-287. https://doi.org/10.1111/jopr.12906
[14]
Shahmiri, R., Standard, C.O., Hart, N.J. and Sorrell, C.C. (2018) Optical Properties of Zirconia Ceramics for Esthetic Dental Restorations: A Systematic Review. The Journal of Prosthetic Dentistry, 119, 36-46. https://doi.org/10.1016/j.prosdent.2017.07.009
[15]
Al-Aali, A.K. (2018) Effect of Phototherapy on Shear Bond Strength of Resin Cements to Zirconia Ceramics: A Systematic Review and Meta-Analysis of in-Vitro Studies. Photodiagnosis and Photodynamic Therapy, 23, 58-62. https://doi.org/10.1016/j.pdpdt.2018.05.006
[16]
Zhuo, R., Deng, Z., Chen, B., et al. (2021) Overview on Development of Acoustic Emission Monitoring Technology in Sawing. The International Journal of Advanced Manufacturing Technology, 116, 1411-1427. https://doi.org/10.1007/s00170-021-07559-5
[17]
He, Y., Li, M., Meng, Z., et al. (2021) An Overview of Acoustic Emission Inspection and Monitoring Technology in the Key Components of Renewable Energy Systems. Mechanical Systems and Signal Processing, 148, Article ID: 107146. https://doi.org/10.1016/j.ymssp.2020.107146
[18]
Guo, L., Huo, K.L. and Guo, J.T. (2019) Acoustic Emission Monitoring of Diamond Grinding Wheel Wear Status Based on EMD. Journal of Hunan University (Natural Science Edition), 46, 58-66.
[19]
Gass, E.S., Sandoval, L.M., Talou, H.M., et al. (2015) High Temperature Mechanical Behavior of Porous Cordierite-Based Ceramic Materials Evaluated Using 3-Point Bending. Procedia Materials Science, 9, 254-261. https://doi.org/10.1016/j.mspro.2015.04.032
[20]
Sundh, A. and Sjögren, G. (2007) A Study of the Bending Resistance of Implant-Supported Reinforced Alumina and Machined Zirconia Abutments and Copies. Dental Materials, 24, 611-617. https://doi.org/10.1016/j.dental.2007.05.021
[21]
Giridhar, D., Vijayaraghavan, L. and Krishnamurthy, R. (2011) Acoustic Emission Response of Sintered Alumina Zirconia Composite during Grooving Process. NDT and E International, 46, 55-62. https://doi.org/10.1016/j.ndteint.2011.11.002
[22]
Chu, L. (2015) Research on Acoustic Emission Characteristics of Ceramic Material Failure Process and Toughening Effect. Master’s Thesis, Beijing Institute of Technology, Beijing.
[23]
Chang, Z.S. (2016) Research on Toughened Ceramic Damage Based on Acoustic Emission Technology. Master’s Thesis, Beijing Institute of Technology, Beijing.
[24]
Lan, Y.X., Liu, W., Li, N., et al. (2023) The Effect of Bubble Defects on the Fracture Toughness of Zirconia Ceramics. Journal of Composite Materials, 40, 6809-6818.
[25]
Yuan, Z.Q., Li, Z.F., Chen, J.X., et al. (2023) CaO/Y2O3 Co Stable ZrO Study on the Microstructure and Mechanical Properties of 2-Phase Ceramics. Chinese Ceramics, 59, 22-29.
[26]
Rodaev, V.V., et al. (2021) An Engineering Zirconia Ceramic Made of Baddeleyite. Materials, 14, Article 4676. https://doi.org/10.3390/ma14164676
[27]
Rukiye, D., Gonca, G.D., Hatice, Ş., et al. (2021) Biaxial Flexural Strength and Phase Transformation Characteristics of Dental Monolithic Zirconia Ceramics with Different Sintering Durations: An in Vitro Study. The Journal of Prosthetic Dentistry, 128, 498-504. https://doi.org/10.1016/j.prosdent.2021.04.003
[28]
Zhao, K., Yang, X., Xiong, L.F., et al. (2023) Damage Characteristics of Stable Crack Propagation Stage in Sandstone with Different Water Content States. Metal Mines. https://kns-cnki-net.webvpn.las.ac.cn/kcms/detail/34.1055.TD.20230522.1826.002.html
[29]
Sun, Z.Q., Xie, L.Z., Liu, J.F., et al. (2014) Research on Damage and Failure of Salt Rock Based on Percolation Model. Geotechnical Mechanics, 35, 441-448.
Sakhaee-Pour, A. and Agrawal, A. (2018) Integrating Acoustic Emission into Percolation Theory to Predict Permeability Enhancement. Journal of Petroleum Science and Engineering, 160, 152-159. https://doi.org/10.1016/j.petrol.2017.10.003
[32]
Gilles, J. (2013) Empirical Wavelet Transform. IEEE Transactions on Signal Processing, 61, 3999-4010. https://doi.org/10.1109/TSP.2013.2265222
