A full-frequency instant core-loss equation built from the induction physical model of magnetic materials, where the iron loss, eddy loss, and hysteresis loss no longer have an integral term, and this new equation provides high simulation accuracy and performs dynamic core loss analysis on non-sinusoidal or pulse magnetic fields. The simulation examples use a high-grade electrical steel sheet 65CS400 by Epstein experimental data covering magnetic field 0.1 - 1.8 T and frequency 50 - 5000 Hz, and the average error of the simulated core loss is less than 4%. Since the simulation is converged by magnetic physical parameters, so the physical relevance of the similar laminated materials can be compared with the coefficient results.
References
[1]
Steinmetz, C.P. (1984) On the Law of Hysteresis. Proc IEEE, 72, 196-221.
https://doi.org/10.1109/PROC.1984.12842
[2]
Reinert, J., Brockmeyer, A. and Donker, R.W.D. (1999) Calculation of Losses in Ferro- and Ferromagnetic Materials Based on the Modified Steinmetz Equation. Proceedings of 34th Annual Meeting of the IEEE Industry Applications Society, 3, 2087- 2092. https://doi.org/10.1109/IAS.1999.806023
[3]
Li, J.L., Abdallah, T. and Sullivan, C.R. (2001) Improved Calculation of Core Loss with Nonsinusoidal Waveforms. Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting, 2203-2210.
https://doi.org/10.1109/IAS.2001.955931
[4]
Venkatachalam, K., Charles, R.S., Abdallahet, T., et al. (2002) Accurate Predication of Ferrite Core Loss with Nonsinusoidal Waveforms Using Only Steinmetz Parameters. COMPEL 2002: 8th IEEE Workshop on Computers in Power Electronics.
[5]
Bossche, A.P., Sype, D.M. and Valchev, V.C. (2005) Ferrite Loss Measurement and Models in Half Bridge and Full Bridge Waveforms. Power Electronics Specialists Conference, 1535-1539.
[6]
Chen, K.F. (2009) Iron-Loss Simulation of Laminated Steels Based on Expanded Generalized Steinmetz Equation. Asia-Pacific Power and Energy Engineering Conference, 1-3.
[7]
Chen, K.F. (2010) The Core Loss Prediction for Laminated Steels. 4th International Conference Magnetism and Metallurgy WMM’10.
[8]
Mühlethaler, J., Biela, J., Kolar, J.W., et al. (2012) Improved Core-Loss Calculation for Magnetic Components Employed in Power Electronic Systems. IEEE Transactions on Power Electronics, 27, 964-973.
https://doi.org/10.1109/TPEL.2011.2162252
[9]
Hiroaki, M., Toshihisa, S., Takashi, K., et al. (2020) Core Loss Calculation for Power Electronics Converter Excitation from a Sinusoidal Excited Core Loss Data. Magnetism and Magnetic Materials。
[10]
Sobhi, B. and Kent, B. (2021) Core Loss Calculation of Symmetric Trapezoidal Magnetic Flux Density Waveform. IEEE Open Journal of Power Electronics, 627-635.
https://doi.org/10.1109/OJPEL.2021.3133929
[11]
Fiorillo, F. (2004) Measurement and Characterization of Magnetic Materials. Elsevier Academic Press.
