The influence of sodium silicate on the corrosion behaviour of aluminium alloy 7075-T6 in 0.1 M sodium chloride solution was studied by open circuit potential (OCP) and electrochemical impedance spectroscopy (EIS) techniques. Scanning electron microscopy (SEM) was used to characterize the AA7075-T6 surface. Silicate can significantly reduce corrosion deterioration and the inhibition efficiency increases with the concentration of Na2SiO3. The corrosion inhibition mechanism involves the formation of a protective film over the alloy surface by adsorption of aluminosilicate anions from solution, as has also been suggested by others in literature.
Mondolfo, L.F. (2013) Aluminium Alloys: Structure and Properties. Elsevier, Edinburgh.
[3]
Birbilis, N. and Bucheit, R.G. (2005) Electrochemical Characteristics of Intermetallic Phases in Aluminum Alloys: An Experimental Survey and Discussion. Journal of the Electrochemical Society, 152, B140. https://doi.org/10.1149/1.1869984
[4]
Chen, G.S., Gao, M. and Wei, R.P. (1996) Corrosion and Corrosion Fatigue of Airframe Aluminum Alloy. Corrosion, 52, 8-15. https://doi.org/10.5006/1.3292099
[5]
Birbilis, N., Cavanaugh, M.K. and Bucheit, R.G. (2006) Electrochemical Behavior and Localized Corrosion Associated with Al7Cu2Fe Particles in Aluminum Alloy 7075-T651. Corrosion Science, 48, 4202-4215. https://doi.org/10.1016/j.corsci.2006.02.007
[6]
Andreatta, F., Lohrengel, M.M., Terryn, H. and de Wit, J.H.W. (2003) Corrosion Behaviour of Different Tempers of AA7075 Aluminium Alloy. Electrochimica Acta, 48, 3239-3247. https://doi.org/10.1016/S0013-4686(03)00379-7
[7]
Kendig, M.W., Jeanjaquet, S., Addison, R. and Waldrop, J. (2001) Role of Hexavalent Chromium in the Inhibition of Corrosion of Aluminum Alloys. Surface and Coatings Technology, 140, 58-66. https://doi.org/10.1016/S0257-8972(01)01099-4
[8]
Hagans, P.L. and Haas, C.M. (1994) Influence of Metallurgy on the Protective Mechanism of Chromium-Based Conversion Coatings on Aluminum-Copper Alloys. Surface and Interface Analysis, 21, 65-78. https://doi.org/10.1002/sia.740210203
[9]
Kendig, M.W. and Bucheit, R.G. (2003) Corrosion Inhibition of Aluminum and Aluminum Alloys by Soluble Chromates, Chromate Coatings, and Chromate-Free Coatings. Corrosion, 59, 379-400. https://doi.org/10.5006/1.3277570
[10]
Pokorny, P., Tej, P. and Szelag, P. (2016) Chromate Conversion Coatings, and Their Current Application. Metalurgija, 55, 253-256.
[11]
ECHA European Chemical Agency (2015) Chromium VI Compounds—ANNEX XVII to REACH—Conditions of Restriction.
[12]
Sheasby, P.G., Pinner, R. and Wernick, S. (2001) The Surface Treatment and Finishing of Aluminium and Its Alloys. ASM International, Almere.
[13]
Sastri, V.S., Ghali, E. and Elboudjani, M. (2007) Corrosion Prevention and Protection: Practical Solutions. Wiley, Chichester. https://doi.org/10.1002/9780470024546
[14]
Qu, Z. and Otshwe, J. (2021) 2D Materials as Protective Coating against Low and Middle Temperature (100°C-300°C) Corrosion-Erosion in Waste to Energy Plant: Case of Graphene. Graphene, 10, 13-39. https://doi.org/10.4236/graphene.2021.102002
[15]
Yang, X.F., Roonasi, P. and Holmgren, A. (2008) A Study of Sodium Silicate in Aqueous Solution and Sorbed by Synthetic Magnetite Using in Situ ATR-FTIR Spectroscopy.Journal of Colloid and Interface Science, 328, 41-47. https://doi.org/10.1016/j.jcis.2008.08.061
[16]
Jolstera, R., Gunneriusson, L. and Forsling, W. (2010) Adsorption and Surface Complex Modeling of Silicates on Maghemite in Aqueous Suspensions. Journal of Colloid and Interface Science, 342, 493-498. https://doi.org/10.1016/j.jcis.2009.10.080
[17]
Garcia-Cerda, L.A., Mendoza-Gonzalez, O., Perez-Robles, J.F. and Gonzalez-Hernandez, J. (2002) Structural Characterization and Properties of Colloidal Silica Coatings on Copper Substrates.Materials Letters, 56, 450-453. https://doi.org/10.1016/S0167-577X(02)00526-8
[18]
Socha, R.P. and Franser, J. (2005) Mechanism of Formation of Silica-Silicate Thin Films on Zinc.Thin Solid Film, 488, 45-55. https://doi.org/10.1016/j.tsf.2005.04.039
[19]
Aramaki, K. (2002) Self-Healing Mechanism of an Organosiloxane Polymer Film Containing Sodium Silicate and Cerium(III) Nitrate for Corrosion of Scratched Zinc Surface in 0.5 M NaCl. Corrosion Science, 44, 1621-1632. https://doi.org/10.1016/S0010-938X(01)00171-8
[20]
Mccune, R.C., Shits, R.L. and Ferguson, S.M. (1982) A Study of Film Formation on Aluminum in Aqueous Solutions Using Rutherford Backscattering Spectroscopy. Corrosion Science, 22, 1049-1065. https://doi.org/10.1016/0010-938X(82)90091-9
[21]
Inoue, M., Otsu, H., Kominami, H. and Inui, T. (1992) Novel Synthetic Method for the Catalytic Use of Thermally Stable Zirconia: Thermal Decomposition of Zirconium Alkoxides in Organic Media. Applied Catalysis A: General, 97, L25-L30.
[22]
Panagiotakopoulou, C., Papandreopoulos, P. and Batis, G. (2022) Corrosion Protection of CNTs/CNFs Modified Cement Mortars. Journal of Materials Science and Chemical Engineering, 10, 1-17. https://doi.org/10.4236/msce.2022.108001
[23]
Firment, L.E., Bergna, H.E., Swartzfager, D.G., Bierstedt, P.E. and Vankavelaar, M.L. (1989) Silica Coatings on α-Alumina Particles: Analysis and Deposition Mechanism. Surface and Interface Analysis, 14, 46-52. https://doi.org/10.1002/sia.740140111
[24]
Gaggiano, R., Moriamè, P., Biesemans, M., De Graeve, I. and Terryn, H. (2011) Mechanism of Formation of Silicate Thin Films on Porous Anodic Alumina. Surface and Coatings Technology, 205, 5210-5217. https://doi.org/10.1016/j.surfcoat.2011.05.029
[25]
Gaggiano, R., Moriamè, P., Vandendael, I., De Graeve, I. and Terryn, H. (2010) An Infrared Spectroscopic Study of Sodium Silicate Adsorption on Porous Anodic Alumina. Surface and Interface Analysis, 42, 321-327. https://doi.org/10.1002/sia.3143
[26]
Taylor, S.R. and Chambers, B.D. (2008) Identification and Characterization of Nonchromate Corrosion Inhibitor Synergies Using High-Throughput Methods. Corrosion, 64, 255-270. https://doi.org/10.5006/1.3278470
[27]
Hamdy, A.S. (2006) Novel Coating Systems for Corrosion Protection of Al Alloys and Composites in Marine Environment. Surface and Coatings Technology, 200, 3786-3792. https://doi.org/10.1016/j.surfcoat.2005.03.012
[28]
Chen, J.R., Chao, H.Y., Lin, Y.L., Yang, I.J., Oung, J.C. and Pan, F.M. (1991) Electrochemical Study of Oxyanions Effect on Galvanic Corrosion Inhibition. Surface Science, 247, 352-359. https://doi.org/10.1016/0039-6028(91)90148-L
[29]
Iler, R.K. (1979) The Chemistry of Silica: Solubility, Polymerization, Colloid and Surface Properties, and Biochemistry. Wiley, New York.
[30]
Swaddle, T.W. (2001) Silicate Complexes of Aluminum(III) in Aqueous Systems. Coordination Chemistry Reviews, 219-221, 665-686. https://doi.org/10.1016/S0010-8545(01)00362-9
[31]
Knight, C.T.G., Balec, R.J. and Kinrade, S.D. (1988) The Structure of Silicate Anions in Aqueous Alkaline Solutions. Angewandte Chemie International Edition, 46, 8148-8152.
[32]
Kinrade, S.D. and Swaddle, T.W. (1988) Silicon-29 NMR Studies of Aqueous Silicate Solutions. 1. Chemical Shifts and Equilibria. Inorganic Chemistry, 27, 4253-4259. https://doi.org/10.1021/ic00296a034
[33]
Provis, J.L., Duxson, P., Lukey, G.C., Separovic, F., Kriven, W.M. and van Deventer, J.S.J. (2005) The Role of Mathematical Modelling and Gel Chemistry in Advancing Geopolymer Technology. Industrial & Engineering Chemistry Research, 44, 8899-8908. https://doi.org/10.1021/ie050700i
[34]
Natishan, P. and O’Grady, W.E. (2014) Chloride Ion Interactions with Oxide-Covered Aluminum Leading to Pitting Corrosion: A Review. Journal of The Electrochemical Society, 161, C421. https://doi.org/10.1149/2.1011409jes
[35]
Song, G., Atrens, A., St. John, D., Wu, X. and Nairn, J. (1997) The Anodic Dissolution of Magnesium in Chloride and Sulphate Solutions. Corrosion Science, 39, 1981-2004. https://doi.org/10.1016/S0010-938X(97)00090-5
[36]
Song, G., Atrens, A., Wu, X. and Zhang, B. (1998) Corrosion Behaviour of AZ21, AZ501 and AZ91 in Sodium Chloride. Corrosion Science, 40, 1769-1791. https://doi.org/10.1016/S0010-938X(98)00078-X
[37]
Khaled, K.F., Babić-Samardžija, K. and Hackerman, N. (2006) Theoretical Study of the Structural Effects of Polymethylene Amines on Corrosion Inhibition of Iron in Acid Solutions. Corrosion Science, 48, 3014-3034. https://doi.org/10.1016/j.corsci.2005.11.011
[38]
MacDonald, J.R. (1987) Impedance Spectroscopy and Its Use in Analyzing the Steady-State AC Response of Solid and Liquid Electrolytes. Journal of Electroanalytical Chemistry and Interfacial Electrochemistry, 223, 25-50. https://doi.org/10.1016/0022-0728(87)85249-X
[39]
van Westing, E.P.M., Ferrari, G.M. and de Wit, J.H.W. (1993) The Determination of Coating Performance with Impedance Measurements-I. Coating Polymer Properties. Corrosion Science, 34, 1511-1530. https://doi.org/10.1016/0010-938X(93)90245-C
[40]
Mansfeld, F. (1981) Recording and Analysis of AC Impedance Data for Corrosion Studies. Corrosion, 37, 301-307. https://doi.org/10.5006/1.3621688
[41]
Rammelt, U. and Reinhard, G. (1990) On the Applicability of a Constant Phase Element (CPE) to the Estimation of Roughness of Solid Metal Electrodes. Electrochimica Acta, 35, 1045-1049. https://doi.org/10.1016/0013-4686(90)90040-7
[42]
Boukamp, B.A. (1986) A Package for Impedance/Admittance Data Analysis. Solid State Ionics, 18-19, 136-140. https://doi.org/10.1016/0167-2738(86)90100-1
[43]
Poornima, T., Nayak, J. and Nityananda Shetty, A. (2011) Effect of 4-(N, N-Diethylamino) Benzaldehyde Thiosemicarbazone on the Corrosion of Aged 18 Ni 250 Grade Maraging Steel in Phosphoric Acid Solution. Corrosion Science, 53, 3688-3696. https://doi.org/10.1016/j.corsci.2011.07.014
[44]
El-Mahady, G.A., Hegaz, M.M., El-Taib Heakal, F., Mahmoud, H.E., Fathy, A.M. and Sayed, F.M. (2013) Electrochemical Behavior of Maraging Steel in Chloride Containing Environment. International Journal of Electrochemical Science, 8, 2816-2825. https://doi.org/10.1016/S1452-3981(23)14352-5
[45]
Brug, G.J., van der Eden, A.L.G., Sluyters-Rehbach, M. and Sluyters, J.H. (1984) The Analysis of Electrode Impedances Complicated by the Presence of a Constant Phase Element. Journal of Electroanalytical Chemistry and Interfacial Electrochemistry, 176, 275-295. https://doi.org/10.1016/S0022-0728(84)80324-1
[46]
Burstein, G.T. (2005) A Hundred Years of Tafel’s Equation: 1905-2005. Corrosion Science, 47, 2858-2870. https://doi.org/10.1016/j.corsci.2005.07.002
[47]
Barsukov, E. and Macdonald, J.R. (2005) Impedance Spectroscopy. 2nd Edition, Wiley & Sons, New York.
[48]
Moon, S.M. and Pyun, S.I. (1997) The Corrosion of Pure Aluminium during Cathodic Polarization in Aqueous Solutions. Corrosion Science, 39, 399-408. https://doi.org/10.1016/S0010-938X(97)83354-9
[49]
Pourbaix, M. (1974) Atlas of Electrochemical Equilibria in Aqueous Solutions. NACE, Houston.
[50]
Somasundaran, P. (2006) Encyclopedia of Surface and Colloid Science. Taylor & Francis, New York.
[51]
McCafferty, E. and Wightman, J.P. (1997) Determination of the Concentration of Surface Hydroxyl Groups on Metal Oxide Films by a Quantitative XPS Method. Surface and Interface Analysis, 26, 549-564.
