|
|
汽车车轮检测技术发展概述
|
Abstract:
从检测标准及检测设备方面介绍国内汽车车轮检测技术的发展历史与现状，详细介绍乘用车车轮性能检测技术，通过比较国内双轴疲劳检测技术与其他地区的差异，探讨国内在车轮检测领域面临的挑战及未来发展趋势。
This manuscript delineates the evolution and contemporary state of domestic automobile wheel inspection technology, with a focus on testing standards and apparatus. It elaborates on the testing technology for passenger car wheel performance in a comprehensive manner. Moreover, it contrasts the domestic biaxial fatigue testing methodology with those employed in other regions. Additionally, the discourse extends to the exploration of challenges encountered within the domestic sphere of wheel testing and prognosticates on prospective developmental trajectories.
| [1] | 胡林, 谷子逸, 王丹琦, 等. 汽车安全性测评规程现状及趋势展望[J]. 汽车工程, 2024, 46(2): 187-200 240. https://doi.org/10.19562/j.chinasae.qcgc.2024.02.001 |
| [2] | 张升超. 汽车车轮轻量化设计[D]: [硕士学位论文]. 青岛: 青岛大学, 2020. https://doi.org/10.27262/d.cnki.gqdau.2020.002060 |
| [3] | 唐珍珍. 汽车车轮的结构强度分析[J]. 时代汽车, 2022(15): 151-153. |
| [4] | 刘旌扬. 汽车车轮的试验方法及试验结果分析[J]. 汽车技术, 1987(12): 20-29. |
| [5] | 赵玉军. 现代汽车车轮性能检测与分析[D]: [硕士学位论文]. 南京: 南京理工大学, 2015. |
| [6] | 任山, 朱其文, 杜天强. 汽车车轮性能试验方法及标准[J]. 天津汽车, 2003(2): 21-25. |
| [7] | 董云, 代军. 后WTO时代新汽车产业政策分析[J]. 时代经贸, 2006, 4(9): 6-7. |
| [8] | 雷娜. 简述车轮标准现状和标准的制修订情况[J]. 汽车零部件, 2012(9): 31-32. https://doi.org/10.19466/j.cnki.1674-1986.2012.09.006 |
| [9] | GB/T 15704-2012标准修订解读[J]. 汽车零部件, 2013(6): 27. |
| [10] | 张子鹏, 任念祖, 张新峰. GB 36581-2018《汽车车轮安全性能要求及试验方法》解读[J]. 中国汽车, 2019(8): 47-51. |
| [11] | 中华人民共和国工业和信息化部. GB 36581-2018汽车车轮安全性能要求及试验方法[S]. 北京: 中国标准出版社, 2018. |
| [12] | 全国汽车标准化技术委员会. GB/T 5334-2021乘用车车轮弯曲和径向疲劳性能要求及试验方法[S]. 北京: 中国标准出版社, 2021. |
| [13] | ISO 3006:2015 Road Vehicles—Passenger Car Wheels for Road Use—Test Methods. |
| [14] | SAE J328_202107 Wheels—Passenger Car and Light Truck Performance Requirements and Test Procedures. |
| [15] | SAE J2530_202109 Aftermarket Wheels—Passenger Cars and Light Truck Performance Requirements and Test Procedures. |
| [16] | JIS D 4103:2015自動車部品？ホイール？性能及び表示. |
| [17] | AK-LH 08-2008 Wheels Requirements and Tests. |
| [18] | ECE R-124 Type Approval of Wheels of Passenger Cars and Trailers. |
| [19] | 全国汽车标准化技术委员会. GB/T 15704-2012道路车辆轻合金车轮冲击试验方法[S]. 北京: 中国标准出版社, 2013. |
| [20] | ISO 7141:2022 Road Vehicles—Light Alloy Wheels—Lateral Impact Test. |
| [21] | SAE J 175_2020 Wheels—Lateral Impact Test Procedure—Road Vehicles. |
| [22] | GMW14910-2017 Wheel Lateral Impact Test. |
| [23] | 全国汽车标准化技术委员会. QC/T 991-2015乘用车轻合金车轮90？冲击试验方法[S]. 北京: 中国计划出版社, 2015. |
| [24] | 中华人民共和国工业和信息化部. QC/T 258-2013汽车车轮螺母座强度试验[S]. 北京: 中国计划出版社, 2014. |
| [25] | ISO 15172:2005 Road Vehicles—Wheels—Nut Seat Strength Tests. |
| [26] | 全国轮胎轮辋标准化技术委员会. GB/T 3487-2015乘用车轮辋规格系列[S]. 北京: 中国标准出版社, 2016. |
| [27] | 全国汽车标准化技术委员会. QC/T 717-2015汽车车轮跳动要求和检测方法[S]. 北京: 中国计划出版社, 2015. |
| [28] | ISO 16833:2006 Road Vehicles—Wheels—Measurement of Radial and Lateral Run-Out. |
| [29] | 全国汽车标准化技术委员会. QC/T 1112-2019乘用车车轮双轴疲劳试验方法[S]. 北京: 北京科学技术出版社, 2019 |
| [30] | SAE J2562-2021 Biaxial Wheel Fatigue Test. |
| [31] | EUWA ES3.23-2017 Biaxial Fatigue Test for Truck Wheels. |
| [32] | GMW 14340-2018 Biaxial Wheel Fatigue Test. |
| [33] | 李世德. 汽车车轮跳动检测方法及应用研究[J]. 民营科技, 2017(3): 54. |
| [34] | 孙娜, 孙华文, 张振伟, 等. 乘用车轮毂性能试验仿真方法综述[J]. 智能制造, 2022(4): 72-78. |
| [35] | 邱祖峰, 罗茶根, 舒华英. 基于CAE与试验对标方法的汽车车轮研究[J]. 机械工程与自动化, 2023(6): 81-83. |
| [36] | 徐恒斌, 顾佳超, 孟凡荣. 汽车车轮弯曲疲劳试验机国内外研究现状综述[J]. 科技创新与应用, 2014(34): 65. |
| [37] | 刘建功, 王德民. 新型悬臂式汽车车轮弯曲疲劳试验机的研制[J]. 机械工程与自动化, 2014(6): 94-95, 98. https://doi.org/10.3969/J.Issn.1672-6413.2014.06.038 |
| [38] | 曹伟. 车轮径向疲劳试验机研制[D]: [硕士学位论文]. 长春: 长春理工大学, 2012. |
| [39] | 陈国刚, 李世德. 汽车车轮径向冲击机技术指标的核查验证方法[J]. 民营科技, 2017(1): 52. |
| [40] | 尹冀. 汽车钢制车轮的冲击性能仿真与轻量化研究[D]: [硕士学位论文]. 上海: 上海交通大学, 2013. |
| [41] | 岳凯. 汽车车轮冲击试验机研制[D]: [硕士学位论文]. 长春: 长春理工大学, 2012. |
| [42] | 刘鑫. 铝合金车轮双轴疲劳试验和应力应变分析[D]: [硕士学位论文]. 秦皇岛: 燕山大学, 2018. |
| [43] | 刘振国, 王春辉, 杨春旺. 车轮双轴疲劳测试技术的发展概述[J]. 时代汽车,2022(20): 13-15 180. |
| [44] | 佟林. 铝合金车轮双轴疲劳试验失效分析及应用研究[D]: [硕士学位论文]. 秦皇岛: 燕山大学, 2017. |
| [45] | 王晓迪. 铝合金车轮双轴疲劳试验数值模拟研究[D]: [硕士学位论文]. 秦皇岛: 燕山大学, 2014. |
| [46] | 朱英伟, 吕金旗, 王柱兴. 汽车车轮双轴疲劳试验仿真方法[J]. 汽车工业研究, 2018(3): 53-55. |
| [47] | Raju, P.R., Satyanarayana, B., Ramji, K., et al. (2009) Evaluation of Fatigue Life of Aluminium Alloy Wheels under Bending Loads. Fatigue & Fracture of Engineering Materials & Structures, 32, 119-126. https://doi.org/10.1111/j.1460-2695.2008.01316.x |
| [48] | Nallusamy, S., Prabu, N.M., Balakannan, K., et al. (2015) Analysis of Static Stress in an Alloy Wheel of the Passengercar. International Journal of Engineering Research in Africa, 16, 17-25. https://doi.org/10.4028/www.scientific.net/JERA.16.17 |
| [49] | Koppisetti, S.B., Nallu, R. and Penmetsa, R.R. (2022) Passenger Cars Wheel Performance Test Simulation for Service Life Evaluation: A Review. Journal of Failure Analysis and Prevention, 22, 1370-1392. https://doi.org/10.1007/s11668-022-01447-0 |
| [50] | 叶舟, 李烜, 王金粉. 铝合金车轮双轴疲劳试验仿真分析[J]. 机械制造, 2022, 60(4): 59-61 64. |
| [51] | Dong, Z.C., Wang, X.F., Zhang, X.G., et al. (2020) Fatigue Life Prediction for the Steel Passenger Car Wheel in the Dynamic Cornering Fatigue Test. Strength of Materials, 52, 662-682. https://doi.org/10.1007/s11223-020-00217-3 |
| [52] | Reza Kashyzadeh, K., Souri, K., Gharehsheikh Bayat, A., et al. (2022) Fatigue Life Analysis of Automotive Cast Iron Knuckle under Constant and Variable Amplitude Loading Conditions. Applied Mechanics, 3, 517-532. https://doi.org/10.3390/applmech3020030 |
| [53] | Jiang, Q., Zhao, Z., Xu, Z., et al. (2022) Effect of Residual Stresses on Wheel Fatigue Life and Experimental Validation. Machines, 10, Article 924. https://doi.org/10.3390/machines10100924 |
| [54] | 王铁, 田程, 李旭东, 等. 车轮双轴疲劳加速试验方法研究[J]. 汽车工程, 2022, 44(9): 1410-1415 1424. https://doi.org/10.19562/J.Chinasae.Qcgc.2022.09.012 |
| [55] | Kong, Y.S., Abdullah, S., Schramm, D., et al. (2019) Optimization of Spring Fatigue Life Prediction Model for Vehicle Ride Using Hybrid Multi-Layer Perceptron Artificial Neural Networks. Mechanical Systems and Signal Processing, 122, 597-621. https://doi.org/10.1016/j.ymssp.2018.12.046 |
| [56] | Luo, J., Shan, Y., Liu, X., et al. (2023) A Rapid Method to Predict Biaxial Fatigue Life of Automotive Wheels Using Proper Orthogonal Decomposition and Radial Basis Function Algorithm. Advances in Engineering Software, 186, Article 103543. https://doi.org/10.1016/j.advengsoft.2023.103543 |
| [57] | 王铁, 李旭东, 田程, 等. 基于多轴载荷投影构建轮辋双轴疲劳损伤模型[J/OL]. https://doi.org/10.13229/j.cnki.jdxbgxb20220307, 2024-03-14. |
