This research investigates the mechanical and thermal properties of Morus alba combined with polylactic acid in comparison with other natural fibers. The study uses three different fiber and PLA compositions - 20%, 30%, and 40% respectively - to produce composite materials. In addition, another composite with the same fiber volume is treated with a 4% NaOH solution to improve mechanical properties. The composites are processed by twin-screw extrusion, granulation, and injection molding. Tensile strength measurements of raw fibers and NaOH-treated fibers were carried out using a single-fiber tensile test with a gauge length of 40 mm. It was observed that the NaOH surface treatment increases the resistance against tensile loading and exhibited improved properties for raw fiber strands. The diameter of the fibers was measured using optical microscopy. During this research, flexural tests, impact tests, differential scanning calorimetry (DSC), and heat deflection temperature measurements (HDT) were conducted to evaluate the mechanical and thermal properties of the developed composite samples. The results indicate that the mechanical properties of NaOH-treated Morus alba-reinforced polylactic acid outperform both virgin PLA samples and untreated Morus alba samples.
References
[1]
Rowell, R.M., Young, R.A. and Rowell, J.K. (1996) Agro-Fiber Thermoplastic Composites. Lewis Publishers, 377-401.
[2]
Jarukumjorn, K. and Suppakarn, N. (2009) Effect of Glass Fiber Hybridization on Properties of Sisal Fiber-Polypropylene Composites. Composites Part B: Engineering, 40, 623-627. https://doi.org/10.1016/j.compositesb.2009.04.007
[3]
Faris, M. and Sauna, S.M. (2013) Natural Fiber Reinforced Polymer Composites in Industrial Applications: Feasibility of Date Palm Fibers for Sustainable Automotive Industry. Journal of Cleaner Production, 66, 347-354.
[4]
Prithivirajan, R., Balasundar, P., Shyamkumarc, R., Al-Harbid, N.S. Kadaikunnand, S., Ramkumar, T. and Narayanasamy, P. (2018) Characterization of Cellulosic Fibers from Morusalba L. Stem. Journal of Natural Fibers, 16, 503-511. https://doi.org/10.1080/15440478.2018.1426079
[5]
Ajmass, W., Amass, A. and Tighe, B. (1998) A Review of Biodegradable Polymers: Uses, Current Developments in the Synthesis and Characterization of Biodegradable Polyesters, Blends of Biodegradable Polymers and Recent Advances in Biodegradation Studies. Polymer International, 47, 89-144. https://doi.org/10.1002/(SICI)1097-0126(1998100)47:2%3C89::AID-PI86%3E3.0.CO;2-F
[6]
Mohanty, A.K., Misra, M. and Drzal, L.T. (2005) Natural Fibers, Biopolymers, and Biocomposites. CRC Press. https://doi.org/10.1201/9780203508206
[7]
Pickering, K.L. (2008) Properties and Performance of Natural-Fiber Composites. Woodhead Publishing & CRC Press.
[8]
Graupner, N., Herrmann, A.S. and Mussig, J. (2009) Natural and Man-Made Cellulose Fiber-Reinforced Poly (Lactic acid) (PLA) Composites: An Overview about Mechanical Characteristics and Application Areas. Composites Part A: Applied Science and Manufacturing, 40, 810-821. https://doi.org/10.1016/j.compositesa.2009.04.003
[9]
Obi Reddy, K., Raja Nerender Reddy, K.R., Zhang, J., Zhang, J.M. and Varada Rajulu, A. (2013) Effect of Alkali Treatment on the Properties of Century Fiber. Journal of Natural Fibers, 10, 282-296. https://doi.org/10.1080/15440478.2013.800812
[10]
Reddy, K.O., Guduri, B.R. and Rajulu, A.V. (2009) Structural Characterization and Tensile Properties of Borassus Fruit Fibers. Journal of Applied Polymer Science, 114, 603-611. https://doi.org/10.1002/app.30584
[11]
Kommula, V.P., Obi Reddy, K., Shukla, M., Marwala, T. and Varada Rajulu, A. (2013) Mechanical Properties, Water Absorption, and Chemical Resistance of Napier Grass Fiber Strand-Reinforced Epoxy Resin Composites. International Journal of Polymer Analysis and Characterization, 19, 693-708.
[12]
Obi Reddy, K., Shukla, M., Uma Maheswari, C. and Varada Rajulu, A. (2012) Chemical Composition and Structural Characterization of Napier Grass Fibers. Journal of Composite Materials, 46, Article 2987. https://doi.org/10.1177/0021998312454032
[13]
Saravanan, S.S., Kumaravel, A., Nagarajan, T. and Ganeshamoorthy, I. (2014) Effect of Chemical Treatments on Physicochemical Properties of Prosopisjuliflora Fibers. International Journal of Polymer Analysis and Characterization, 19, 383-390. https://doi.org/10.1080/1023666X.2014.903585
[14]
Thiruchitrambalam, M. and Shanmugam, D. (2012) Continuous Unidirectional Palmyra Palm Leaf Stalk Fiber/Glass—Polyester Composites: Static and Dynamic Mechanical Properties. Journal of Reinforced Plastics and Composites, 31, Article 1400. https://doi.org/10.1177/0731684412459248
[15]
Rout, J., Misra, M. and Tripathy, S.S. (2001) The Influence of Fiber Treatment on the Performance of Coir-Polyester Composites. Composites Science and Technology, 61, 1303-1310. https://doi.org/10.1016/S0266-3538(01)00021-5
[16]
Mayandi, K., Rajini, N., Pitchipoo, P., Winowlin Jappes, J.T. and Varada Rajulu, A. (2016) Properties of Untreated and Chemically Treated Cissus Quadrangularis Natural Fibers and Their Composites with Polyester as the Matrix. Polymer Composites, 39, 876-886. https://doi.org/10.1002/pc.24011
[17]
Senthamaraikannan, P. and Kathiresan, M. (2018) Characterization of Raw and Alkali Treated New Natural Cellulosic Fiber from Cocciniagrandis. L. Carbohydrate Polymers, 186, 332-343. https://doi.org/10.1016/j.carbpol.2018.01.072
[18]
Sujaritjuna, W., Uawongsuwanb, P., Pivsa-Arta, W. and Hamadab, H. (2013) Mechanical Property of Surface Modified Natural Fiber Reinforced PLA Biocomposites. Energy Procedia, 34, 664-672. https://doi.org/10.1016/j.egypro.2013.06.798
[19]
Siva, R., Valarmathi, T.N. and Palanikumar, K. (2020) Effects of Magnesium Carbonate Concentration and Lignin Presence on Properties of Natural Cellulosic Cissusquadrangularis Fiber Composites. International Journal of Biological Macromolecules, 164, 3611-3620. https://doi.org/10.1016/j.ijbiomac.2020.08.195
[20]
Khalid, M.Y., Rashid, A.A., Arif, Z.U., Sheikh, M.F., Arshad, H. and Nasir, M.A. (2021) Tensile Strength Evaluation of Glass/Jute Fibers Reinforced Composites: An Experimental and Numerical Approach. Results in Engineering, 10, Article 100232. https://doi.org/10.1016/j.rineng.2021.100232
[21]
Gummadavalli, G., Schuster, J. and Shaik, Y.P. (2023) Development of “Cissusquadrangularis” Composite Material with Elevated Mechanical Properties and Thermal Stability. Journal of Composites Science, 7, Article 445. https://doi.org/10.3390/jcs7110445
[22]
Athijayamani, A., Thiruchitrambalam, M., Natarajan, U. and Pazhanivel, B. (2010) Influence of Alkali-Treated Fibers on the Mechanical Properties and Machinability of Roselle and Sisal Fiber Hybrid Polyester Composite. Polymer Composites, 31, 723-731. https://doi.org/10.1002/pc.20853
[23]
Anuar, H., Zuraida, A., Kovacs, J.G. and Tabi, T, (2011) Improvement of Mechanical Properties of Injection-Molded Polylactic Acid-Kenaf Fiber Biocomposite. Journal of Thermoplastic Composite Materials, 25, 153-164. https://doi.org/10.1177/0892705711408984
[24]
Ribeiro, J., Bueno, G., Martín, M.R. and Rocha, J. (2023) Experimental Study on Mechanical Properties of Hemp Fibers Influenced by Various Parameters. Sustainability, 15, Article 9610. https://doi.org/10.3390/su15129610
[25]
Christophe, B. (2018) 8-Tensile Properties of Flax Fibers. In: Bunsell, A.R., Ed., Handbook of Properties of Textile and Technical Fibers. 2nd Edition, Woodhead Publishing, 275-300. https://doi.org/10.1016/B978-0-08-101272-7.00008-0
[26]
Kumar, S., Dang, R., Manna, A., Dhiman, N.K., Sharma, S., Dwivedi, S.P. and Abbas, M. (2023) Optimization of Chemical Treatment Process Parameters for Enhancement of Mechanical Properties of Kenaf Fiber-Reinforced Polylactic Acid Composites: A Comparative Study of Mechanical, Morphological and Microstructural Analysis. Journal of Materials Research and Technology, 26, 8366-8387. https://doi.org/10.1016/j.jmrt.2023.09.157
[27]
Alao, P.F., Marrot, L., Burnard, M.D., Lavrič, G., Saarna, M. and Kers, J. (2021) Impact of Alkali and Silane Treatment on Hemp/PLA Composites’ Performance: From Micro to Macro Scale. Polymers, 13, Article 851. https://doi.org/10.3390/polym13060851
[28]
Andrzejewski, J. and Nowakowski, M. (2021) Development of Toughened Flax Fiber Reinforced Composites. Modification of Poly (Lactic acid)/Poly (Butylene Adipate-Co-Terephthalate) Blends by Reactive Extrusion Process. Materials, 14, Article 1523. https://doi.org/10.3390/ma14061523
