全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

CPG Human Motion Phase Recognition Algorithm for a Hip Exoskeleton with VSA Actuator

DOI: 10.4236/jsip.2024.152002, PP. 19-59

Keywords: Variable Stiffness Actuator, Plate Spring, CPG Algorithm Convergence Criterion, Human Motion Phase Recognition, Simulink and Adams Co-Simulation

Full-Text   Cite this paper   Add to My Lib

Abstract:

Due to the dynamic stiffness characteristics of human joints, it is easy to cause impact and disturbance on normal movements during exoskeleton assistance. This not only brings strict requirements for exoskeleton control design, but also makes it difficult to improve assistive level. The Variable Stiffness Actuator (VSA), as a physical variable stiffness mechanism, has the characteristics of dynamic stiffness adjustment and high stiffness control bandwidth, which is in line with the stiffness matching experiment. However, there are still few works exploring the assistive human stiffness matching experiment based on VSA. Therefore, this paper designs a hip exoskeleton based on VSA actuator and studies CPG human motion phase recognition algorithm. Firstly, this paper puts forward the requirements of variable stiffness experimental design and the output torque and variable stiffness dynamic response standards based on human lower limb motion parameters. Plate springs are used as elastic elements to establish the mechanical principle of variable stiffness, and a small variable stiffness actuator is designed based on the plate spring. Then the corresponding theoretical dynamic model is established and analyzed. Starting from the CPG phase recognition algorithm, this paper uses perturbation theory to expand the first-order CPG unit, obtains the phase convergence equation and verifies the phase convergence when using hip joint angle as the input signal with the same frequency, and then expands the second-order CPG unit under the premise of circular limit cycle and analyzes the frequency convergence criterion. Afterwards, this paper extracts the plate spring modal from Abaqus and generates the neutral file of the flexible body model to import into Adams, and conducts torque-stiffness one-way loading and reciprocating loading experiments on the variable stiffness mechanism. After that, Simulink is used to verify the validity of the criterion. Finally, based on the above criterions, the signal mean value is removed using feedback structure to complete the phase recognition algorithm for the human hip joint angle signal, and the convergence is verified using actual human walking data on flat ground.

References

[1]  Bao, G.J., et al. (2019) Academic Review and Perspectives on Robotic Exoskeletons. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 27, 2294-2304.
https://doi.org/10.1109/TNSRE.2019.2944655
[2]  Wesley, R., et al. (2017) On the Stiffness Selection for Torque-Controlled Series-Elastic Actuators. IEEE Robotics and Automation Letters, 2, 2255-2262.
https://doi.org/10.1109/LRA.2017.2726141
[3]  Zhang, T., Tran, M. and Huang, H. (2019) Admittance Shaping-Based Assistive Control of SEA-Driven Robotic Hip Exoskeleton. IEEE/ASME Transactions on Mechatronics, 24, 1508-1519.
https://doi.org/10.1109/TMECH.2019.2916546
[4]  Baud, R., Manzoori, A.R., Ijspeert, A., et al. (2021) Review of Control Strategies for Lower-Limb Exoskeletons to Assist Gait. Journal of Neuro Engineering and Rehabilitation, 18, Article No. 119.
https://doi.org/10.1186/s12984-021-00906-3
[5]  Grebenstein, M., Chalon, M., Friedl, W., Haddadin, S., Wimböck, T., Hirzinger, G. and Siegwart, R. (2012) The Hand of the DLR Hand Arm System: Designed for Interaction. The International Journal of Robotics Research, 31, 1531-1555.
https://doi.org/10.1177/0278364912459209
[6]  Braun, D.J., Petit, F., Huber, F., Haddadin, S., van der Smagt, P., Albu-Schaffer, A. and Vijayakumar, S. (2013) Robots Driven by Compliant Actuators: Optimal Control under Actuation Constraints. IEEE Transactions on Robotics, 2, 1085-1101.
https://doi.org/10.1109/TRO.2013.2271099
[7]  Visser, L.C., Stramigioli, S. and Bicchi, A. (2011) Embodying Desired Behavior in Variable Stiffness Actuators. IFAC Proceedings, 44, 9733-9738.
https://doi.org/10.3182/20110828-6-IT-1002.02202
[8]  Migliore, S.A., Brown, E.A. and de Weerth, S.P. (2005) Biologically Inspired Joint Stiffness Control. Proceedings of the 2005 IEEE International Conference on Robotics and Automation, Barcelona, 18-22 April 2005.
[9]  Jafari, A., Tsagarakis, N.G., Vanderborght, B. and Caldwell, D.G. (2010) A Novel Actuator with Adjustable Stiffness (AwAS). 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems, 18-22 October 2010, 4201-4206.
https://doi.org/10.1109/iros.2010.5648902
[10]  Jafari, A., Tsagarakis, N.G. and Caldwell, D.G. (2011) AwAS-II: A New Actuator with Adjustable Stiffness Based on the Novel Principle of Adaptable Pivot Point and Variable Lever Ratio. 2011 IEEE International Conference on Robotics and Automation, Shanghai, 9-13 May 2011, 4638-4643.
https://doi.org/10.1109/icra.2011.5979994
[11]  Wolf, S., Eiberger, O. and Hirzinger, G. (2011) The DLR FSJ: Energy Based Design of a Variable Stiffness Joint. 2011 IEEE International Conference on Robotics and Automation, Shanghai, 9-13 May 2011, 5082-5089.
https://doi.org/10.1109/icra.2011.5980303
[12]  Eiberger, O., Haddadin, S., Weis, M., Albu-Schäffer, A. and Hirzinger, G. (2010) On Joint Design with Intrinsic Variable Compliance: Derivation of the DLR QA-Joint. 2010 IEEE International Conference on Robotics and Automation, Anchorage, 3-7 May 2010, 1687-1694.
https://doi.org/10.1109/robot.2010.5509662
[13]  Morita, T. and Sugano, S. (1995) Development of One-DOF Robot Arm Equipped with Mechanical Impedance Adjuster. Proceedings 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots, Pittsburgh, 5-9 August 1995, 407-412.
https://doi.org/10.1109/iros.1995.525828
[14]  Hollander, K.W., Sugar, T.G. and Herring, D.E. (2005) Adjustable Robotic Tendon Using a ‘Jack Spring’. 2005 9th International Conference on Rehabilitation Robotics, Chicago, 28 June-1 July 2005, 113-118.
[15]  Vanderborght, B., Albu-Schaeffer, A., Bicchi, A., Burdet, E., Caldwell, D.G., Carloni, R., et al. (2013) Variable Impedance Actuators: A Review. Robotics and Autonomous Systems, 61, 1601-1614.
https://doi.org/10.1016/j.robot.2013.06.009
[16]  Hiroaki, S., et al. (2000) Development of a Robot Joint Mechanism with Variable Compliance by Rotating a Leaf Spring.
https://searchworks-lb.stanford.edu/view/4554798
[17]  Tucker, M.R., Olivier, J., Pagel, A., Bleuler, H., Bouri, M., Lambercy, O., et al. (2015) Control Strategies for Active Lower Extremity Prosthetics and Orthotics: A Review. Journal of Neuro Engineering and Rehabilitation, 12, Article No. 1.
https://doi.org/10.1186/1743-0003-12-1
[18]  Guo, W., Yang, C.W., et al. (2015) Dynamic Solution of the Lower Extremity Joint Torques in Man-Machine System of Lower Extremity Exoskeleton. Machinery & Electronics, 10, 71-75.
[19]  Farina, D., Merletti, R. and Enoka, R.M. (2004) The Extraction of Neural Strategies from the Surface EMG. Journal of Applied Physiology, 96, 1486-1495.
https://doi.org/10.1152/japplphysiol.01070.2003
[20]  Ardestani, M.M., Zhang, X., Wang, L., Lian, Q., Liu, Y., He, J., et al. (2014) Human Lower Extremity Joint Moment Prediction: A Wavelet Neural Network Approach. Expert Systems with Applications, 41, 4422-4433.
https://doi.org/10.1016/j.eswa.2013.11.003
[21]  Sepulveda, F., Wells, D.M. and Vaughan, C.L. (1993) A Neural Network Representation of Electromyography and Joint Dynamics in Human Gait. Journal of Biomechanics, 26, 101-109.
https://doi.org/10.1016/0021-9290(93)90041-c
[22]  Karatsidis, A., Jung, M., Schepers, H.M., et al. (2018) Predicting Kinetics Using Musculoskeletal Modeling and Inertial Motion Capture.
https://doi.org/10.48550/arXiv.1801.01668
[23]  Xiong, B., Zeng, N., Li, H., Yang, Y., Li, Y., Huang, M., et al. (2019) Intelligent Prediction of Human Lower Extremity Joint Moment: An Artificial Neural Network Approach. IEEE Access, 7, 29973-29980.
https://doi.org/10.1109/access.2019.2900591
[24]  Goulermas, J.Y., Howard, D., Nester, C.J., Jones, R.K. and Ren, L. (2005) Regression Techniques for the Prediction of Lower Limb Kinematics. Journal of Biomechanical Engineering, 127, 1020-1024.
https://doi.org/10.1115/1.2049328
[25]  Zeng, N., Wang, Z., Zineddin, B., Li, Y., Du, M., Xiao, L., et al. (2014) Image-Based Quantitative Analysis of Gold Immunochromatographic Strip via Cellular Neural Network Approach. IEEE Transactions on Medical Imaging, 33, 1129-1136.
https://doi.org/10.1109/tmi.2014.2305394
[26]  Souron, R., Bordat, F., Farabet, A., Belli, A., Feasson, L., Nordez, A., et al. (2016) Sex Differences in Active Tibialis Anterior Stiffness Evaluated Using Supersonic Shear Imaging. Journal of Biomechanics, 49, 3534-3537.
https://doi.org/10.1016/j.jbiomech.2016.08.008
[27]  Jang, J., Kim, K., Lee, J., Lim, B. and Shim, Y. (2015) Online Gait Task Recognition Algorithm for Hip Exoskeleton. 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems, Hamburg, 28 September-2 October 2015, 5327-5332.
https://doi.org/10.1109/iros.2015.7354129
[28]  Zhang, T., Tran, M. and Huang, H.H. (2017) NREL-Exo: A 4-DoFs Wearable Hip Exoskeleton for Walking and Balance Assistance in Locomotion. 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems, Vancouver, 24-28 September 2017, 508-513.
https://doi.org/10.1109/iros.2017.8202201
[29]  Schrade, S.O., Dätwyler, K., Stücheli, M., Studer, K., Türk, D., Meboldt, M., et al. (2018) Development of VariLeg, an Exoskeleton with Variable Stiffness Actuation: First Results and User Evaluation from the CYBATHLON 2016. Journal of Neuro Engineering and Rehabilitation, 15, Article No. 18.
https://doi.org/10.1186/s12984-018-0360-4
[30]  Ding, Y., Galiana, I., Siviy, C., Panizzolo, F.A. and Walsh, C. (2016) Imu-Based Iterative Control for Hip Extension Assistance with a Soft Exosuit. 2016 IEEE International Conference on Robotics and Automation, Stockholm, 16-21 May 2016, 3501-3508.
https://doi.org/10.1109/icra.2016.7487530
[31]  Bergmann, L., Lück, O., Voss, D., Buschermöhle, P., Liu, L., Leonhardt, S., et al. (2023) Lower Limb Exoskeleton with Compliant Actuators: Design, Modeling, and Human Torque Estimation. IEEE/ASME Transactions on Mechatronics, 28, 758-769.
https://doi.org/10.1109/tmech.2022.3206530
[32]  Lee, S., Crea, S., Malcolm, P., Galiana, I., Asbeck, A. and Walsh, C. (2016) Controlling Negative and Positive Power at the Ankle with a Soft Exosuit. 2016 IEEE International Conference on Robotics and Automation, Stockholm, 16-21 May 2016, 3509-3515.
https://doi.org/10.1109/icra.2016.7487531
[33]  Chinimilli, P.T., Subramanian, S.C., Redkar, S. and Sugar, T. (2019) Human Locomotion Assistance Using Two-Dimensional Features Based Adaptive Oscillator. 2019 Wearable Robotics Association Conference (WearRAcon), Scottsdale, 25-27 March 2019, 92-98.
https://doi.org/10.1109/wearracon.2019.8719628
[34]  Seo, K., Lee, J., Lee, Y., Ha, T. and Shim, Y. (2016) Fully Autonomous Hip Exoskeleton Saves Metabolic Cost of Walking. 2016 IEEE International Conference on Robotics and Automation, Stockholm, 16-21 May 2016, 4628-4635.
https://doi.org/10.1109/icra.2016.7487663
[35]  Seo, K., Hyung, S.Y., Choi, B.K., Lee, Y. and Shim, Y. (2015) A New Adaptive Frequency Oscillator for Gait Assistance. 2015 IEEE International Conference on Robotics and Automation, Seattle, 26-30 May 2015, 5565-5571.
https://doi.org/10.1109/icra.2015.7139977

Full-Text

Contact Us

[email protected]

QQ:3279437679

WhatsApp +8615387084133