Influence of Cutting Conditions on Tool Life, Tool Wear and Surface Finish in the Face Milling Process

the main goal of this work is to study the influence of cutting conditions - cutting speed, feed velocity and feed per tooth - on tool life and surface finish of the workpiece in the face milling of flat surfaces. aiming to achieve this goal, several milling experiments were carried out with different cutting speeds, feed velocities and feeds per tooth. in the first phase of the experiments, cutting speed was varied without varying feed velocity, which caused a variation in feed per tooth. in the second phase of the experiments, cutting speed and feed velocity were varied in such a way that feed per tooth was kept constant. tool flank wear and surface roughness of the workpiece were measured as cutting time elapsed. the main conclusions of this work are that a) cutting speed has a strong influence on tool life, regardless of whether feed velocity or feed per tooth varies and b) an increase in surface roughness of the workpiece is not closely related to an increase in wear of the primary cutting edge.