Probe penetration test applied for evaluating shotcrete compressive strength

this study presents a methodology for evaluating shotcrete compressive strength. because of the high surface roughness and low thickness of the concrete layer observed in shotcrete structures, the proposed methodology is based on the probe penetration test. in a first phase, the variability of the probe penetration test was investigated to define the number of tests that are required to characterise the test correlation curve. then, a procedure that can be applied to define the correlation curve was described. this procedure includes the moulding of shotcrete plates in loco, the control of the discharge energy of the pins, the extraction of the plates' samples to determine the concrete compressive strength, and statistical analysis. with the test correlation curve, an evaluation of the structure and data analysis can be performed. to verify the applicability of the proposed methodology, the structure of a shotcrete tunnel in a small hydropower plant was investigated. in the analysed structure, strength results that were non-compliant with the project specifications and a lack of concrete homogeneity were observed. since the analysed methodology allowed for the characterisation of the considered structure conditions, the proposed solution is adequate for evaluating the compression strength of shotcrete structures.