全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

Preparation, Properties and Application of C/C-SiC Composites Fabricated by Warm Compacted-in situ Reaction

Keywords: C/C-SiC,Ceramic-matrix composites,Tribology,Warm compacted-in situ reaction

Full-Text   Cite this paper   Add to My Lib

Abstract:

Carbon fibre reinforced carbon and SiC dual matrices composites (C/C-SiC) show superior tribological properties, high thermal shock resistance and good abrasive resistance, and they are promising candidates for advanced brake and clutch systems. The microstructure, mechanical properties, friction and wear properties, and application of the C/C-SiC composites fabricated by warm compacted-in situ reaction were introduced. The results indicated that the composites were composed of 50-60 wt pct carbon, 2-10 wt pct residual silicon and 30-40 wt pct silicon carbide. The C/C-SiC brake composites exhibited good mechanical properties. The value of flexural strength and compressive strength could reach 160 and 112 MPa, respectively. The impact strength was about 2.5 kJ·m-2. The C/C-SiC brake composites showed excellent tribological performance, including high coefficient of friction (0.38), good abrasive resistance (1.10 μm/cycle) and brake steadily on dry condition. The tribological properties on wet condition could be mostly maintained. The silicon carbide matrix in C/C-SiC brake composites improved the wear resistance, and the graphite played the lubrication function, and right volume content of graphite was helpful to forming friction film to reduce the wear rate. These results showed that C/C-SiC composites fabricated by warm compacted-in situ reaction had excellent properties for use as brake materials.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133