杨乃宾, 梁 伟. 大飞机复合材料结构设计导论 [M]. 北京: 航空工业出版社, 2009: 38-40. Yang Naibin, Liang Wei. The introduction of large aircraft structure design of composite materials [M]. Beijing: Aviation Industry Press, 2009: 38-40.
[2]
沈 真, 张晓晶. 复合材料飞机结构强度设计与验证概论[M]. 上海: 上海交通大学出版社, 2011: 21-25. Shen Zhen, Zhang Xiaojing. Design and verification of composite aircraft structure strength [M]. Shanghai: Press of Shanghai Jiaotong University, 2011: 21-25.
[3]
Federal Aviation Administration, Department of Transportation. AC 20-107B Subject: composite aircraft structures, advisory circular [S]. Washington D.C., US: Federal Aviation Administration, Department of Transportation, 2009.
[4]
沈 真, 杨胜春, 陈普会. 复合材料抗冲击性能和结构压缩设计许用值 [J]. 航空学报, 2007, 28(3): 561-566. Shen Zhen, Yang Shengchun, Chen Puhui. Behaviors of composite materials to withstand impact and structural compressive design allowableness [J]. Acta Aeronautica et Astronautica Sinica, 2007, 28(3): 561-566.
[5]
沈 真, 杨胜春, 陈普会. 复合材料层压板抗冲击行为及表征方法的实验研究 [J]. 复合材料学报, 2008, 25(5): 125-133. Shen Zhen, Yang Shengchun, Chen Puhui. Experimental study on the behavior and characterization methods of composite laminates to withstand impact [J]. Acta Materiae Compositae Sinica, 2008, 25(5): 125-133.
[6]
杨 宇, 孙侠生, 杨胜春, 等. 含冲击损伤复合材料层压板压缩破坏机制试验研究 [J]. 复合材料学报, 2012, 29(3): 197-202. Yang Yu, Sun Xiasheng, Yang Shengchun, et al. Experimental study on compressive failure mechanism of low-velocity impact-damaged composite laminates [J]. Acta Materiae Compositae Sinica, 2012, 29(3): 197-202.
[7]
Sebaey T A, González E V, Lopes C S, et al. Damage resistance and damage tolerance of dispersed CFRP laminates: Effect of ply clustering [J]. Composite Structures, 2013, 106: 96-103.
[8]
Choi H Y, Chang F K. A model for predicting damage in graphite/epoxy laminated composites resulting from low-velocity point impact [J]. Journal of Composite Materials, 1992, 26(14): 2134-2168.
[9]
He W, Guan Z, Li X, et al. Prediction of permanent indentation due to impact on laminated composites based on an elasto-plastic model incorporating fiber failure [J]. Composite Structures, 2013, 96: 232-242.
[10]
González E V, Maimí P, Camanho P P, et al. Simulation of drop-weight impact and compression after impact tests on composite laminates [J]. Composite Structures, 2012, 94(11): 3364-3378.
[11]
Hiroshi S, Wataru S, Yuuichiro A, et al. Compressive behavior of impact damaged composite laminates [C]//16th International Conference on Composite Materials. Kyoto: 2007.
[12]
Cesari F, Dal Re V, Minak G, et al. Damage and residual strength of laminated carbon-epoxy composite circular plates loaded at the centre [J]. Composites Part A: Applied Science and Manufacturing, 2007, 38(4): 1163-1173.
[13]
林智育, 许希武. 复合材料层板低速冲击后压缩强度 [J]. 复合材料学报, 2008, 25(1): 140-146. Lin Zhiyu, Xu Xiwu. Residual compressive strength of composite laminates after low-velocity impact [J]. Acta Materiae Compositae Sinica, 2008, 25(1): 140-146.
[14]
American Society for Testing and Materials International. ASTM D7136/D7136M-07 Standard test method for measuring the damage resistance of a fiber-reinforced polymer matrix composite to a drop-weight impact event [S]. Philadelphia: ASTM International, 2007.
[15]
American Society for Testing and Materials International. ASTM D7137/D7137M-07 Standard test method for compressive residual strength properties of damaged polymer matrix composite plates [S]. Philadelphia: ASTM International, 2007.
[16]
郑晓霞, 郑锡涛, 沈 真, 等. 低速冲击与准静态压痕力下复合材料层合板的损伤等效性 [J]. 航空学报, 2010, 31(5): 928-933. Zheng Xiaoxia, Zheng Xitao, Shen Zhen, et al. Damage equivalent of composite laminates subjected to drop-weight impact and quasi-static indentation force [J]. Acta Aeronautica et Astronautica Sinica, 2010, 31(5): 928-933.
