全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

复合材料层板静压入破坏机制

, PP. 135-139

Keywords: 静压入,集中压痕力,复合材料层合板,逐渐损伤

Full-Text   Cite this paper   Add to My Lib

Abstract:

建立一个有效的计算模型,以分析复合材料层板在静压入过程中发生分层、纤维断裂的现象。该计算模型基于有限元程序的三维逐渐损伤理论对层板的静压入全过程进行模拟,对逐层逐个单元的损伤进行判断,可以模拟任意角度、铺层厚度的层板在递增载荷下的逐渐损伤破坏过程。对炭纤维增强环氧树脂基复合材料层板在静压入过程中发生的分层和纤维断裂现象进行预测,并与实验结果进行比较;对炭纤维增强双马来酰亚胺树脂基复合材料层板在静压入过程中的分层损伤和最终破坏接触力的大小进行预测,并与低速冲击下的结果进行比较。数值仿真与实验结果吻合较好,表明静压入分析方法是复合材料层板在低速冲击下产生损伤的可替换分析方法。

References

[1]  Lee S M, Zahuta P. Instrumented impact and static indentation of composites [J]. Journal of Composite Materials, 1991, 25: 204 -222.
[2]  Poe C C, Jr. Mechanics methodology for textile preform composite materials // Proc of the 28th International Technical Conference. Covina, CA: Society for the Advancement of Material and Process Engineering, 1996: 324 -338.
[3]  Lagace P A, Williams J E, Tsang P H W. A preliminary proposition for a test method to measure (impact) damage resistance [J]. Journal of Reinforced Plastics and Composites, 1993, 12: 585 -601.
[4]  沈 真, 张子龙, 王 进, 杨胜春, 叶 林. 复合材料损伤阻抗和损伤容限的性能表征 [J]. 复合材料学报, 2004, 21(5): 140 -145. Shen Zhen, Zhang Zilong, Wang Jin, Yang Shengchun, Ye Lin. Characterization of damage resistance and damage tolerance behavior of composite laminates [J]. Acta Materiae Compositae Sinica, 2004, 21(5): 140 -145.
[5]  ASTM. ASTM Standard D6264-98. Standard test method for measuring the damage resistance of a fiber-reinforced polymer-matrix composite to a concentrated quasi-static indentation force [S]. Philadelphia: American Society for Testing and Materials, 1998.
[6]  熊俊杰. 复合材料层压板对集中准静态压痕力的损伤阻抗分析 . 南京: 南京航空航天大学, 2006. Xiong Junjie. Research on damage resistance of laminated composites subjected to concentrated quasi-static indentation . Nanjing: Nanjing University of Aeronautics and Astronautics, 2006.
[7]  关志东. 复合材料层板及加筋层板低速冲击损伤过程的三维动态有限元模拟研究 . 北京: 北京航空航天大学, 1994. Guan Zhidong. Transient dynamic analysis of impact and damage processes of laminated composite panels and stiffened panels due to low-velocity impact . Beijing: Beijing University of Aeronautics and Astronautics, 1994.
[8]  崔海坡, 温卫东, 崔海涛. 复合材料层合板的低能冲击损伤及剩余拉伸强度研究 [J]. 宇航学报, 2005(6): 784 -788. Cui Haipo, Wen Weidong, Cui Haitao. The researches on low energy impact damage and residual tensile strength of composite laminate [J]. Journal of Astronautics, 2005(6): 784 -788.
[9]  中国航空研究院. 复合材料结构设计手册 [M]. 北京: 航空工业出版社, 2001: 617 -618. Institute of Chinese Aviation Research. Handbook of composite structure design [M]. Beijing: Aviation Industry Press, 2001: 617 -618.
[10]  关志东, 郭 渊. 含缺陷的复合材料层合板低速冲击过程的有限元模拟 [J]. 复合材料学报, 2006, 23(2): 180 -184. Guan Zhidong, Guo Yuan. Computer simulation of low-velocity impact process of the composite laminate with defect [J]. Acta Materiae Compositae Sinica, 2006, 23(2): 180 -184.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133