全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用：99美元
投递稿件

查看量下载量

相关文章

更多...
工程力学  2015 

对接焊缝连接高温后力学性能试验研究

DOI: 10.6052/j.issn.1000-4750.2014.04.S043, PP. 298-303

Keywords: 对接焊缝,高温后,试验研究,力学性能,鉴定修复

Full-Text   Cite this paper   Add to My Lib

Abstract:

对39个对接焊缝连接接头试件进行了高温冷却后的拉伸试验,研究了高温过火对其强度和变形性能的影响规律。试验的主要参数为过火温度和冷却方式,其中过火温度介于200℃~800℃,冷却方式包括自然冷却和泼水冷却。试验结果表明,常温下发生母材塑性破坏的对接焊缝试件,在过火温度较高时全部发生焊缝断裂,试样无明显颈缩,破坏突然;过火温度超过400℃后,冷却方式对对接焊缝连接试件的高温后力学性能有较大影响,自然冷却情况下试件从500℃开始发生焊缝断裂,试件极限强度和极限变形最大降低幅度分别为20%和50%,泼水冷却情况下试件从600℃开始发生焊缝断裂,试件极限强度和极限变形最大降低幅度分别为10%和35%。

 References

[1]  蒋首超, 李国强, 韩兵康, 彭航. 某钢结构梯架火灾后性能分析与鉴定[J]. 结构工程师, 2009, 25(1): 124―127.
[2]  Jiang Shouchao, Li Guoqiang, Han Bingkang, Peng Hang. Appraisal on structural safety of a steel frame after fire [J]. Structural Engineers, 2009, 25(1): 124―127. (in Chinese)
[3]  王卫永, 董毓利, 隋炳强. 焊接钢框架边节点抗火性能试验[J]. 东南大学学报(自然科学版), 2007, 37(2): 240―244.
[4]  Wang Weiyong, Dong Yuli, Sui Bingqiang. Fire-resistant experiment of welded single-sided joint of steel frame [J]. Journal of Southeast University (Natural Science Edition) , 2007, 37(2): 240―244. (in Chinese)
[5]  余红霞, 刘涛. 美国世贸中WTC7次梁-柱节点高温下的破坏行为分析[J]. 钢结构, 2010, 8(25): 76―82.
[6]  Yu Hongxia, Liu Tao. Analysis of behavior of secondary beam-column connections of WTC7 at high temperature [J]. Steel Structure, 2010, 8(25): 76―82. (in Chinese)
[7]  Yu L. Behavior of bolted connections during and after a fire [D]. Austin: University of Texas at Austin, 2006.
[8]  楼国彪, 俞珊, 王锐. 高强度螺栓过火冷却后力学性能试验研究[J]. 建筑结构学报, 2012, 33(2): 33―40.
[9]  Lou Guobiao, Yu Shan, Wang Rui. Mechanical properties of high-strength bolts after fire [J]. Journal of Building Structures, 2012, 33(2): 33―40. (in Chinese)
[10]  Lou Guobiao, Zhu Meichun, Li Ming, Zhang Chao, Li Guoqiang. Experimental research on slip-resistant bolted connections after fire [J]. Journal of Constructional Steel Research, 2015,104(1): 1―8.
[11]  Hanus F, Zilli G, Franssen J M. Experimental tests and analytical models for welds and Grade 8.8 bolts under heating and subsequent cooling [J] Journal of Structural Fire Engineering, 2011, 2(3): 181―194.
[12]  陈建锋, 曹平周, 董先锋. 高温后正面角焊缝抗拉剪切强度的试验[J]. 焊接学报, 2009, 30(9): 81―84.
[13]  Chen Jianfeng, Cao Zhouping, Dong Xianfeng. Experiment on tensile-shear strength of post-elevated temperature transverse fillet weld [J]. Transactions of the China Welding Institution, 2009, 30(9): 81―84. (in Chinese)
[14]  GB/T 2651-2008, 《焊接接头拉伸试验方法》[S]. 北京: 中国标准出版社, 2008.
[15]  GB/T 2651-2008, Tensile test method on welded joints [S]. Beijing: China Standards Press, 2008. (in Chinese)
[16]  GB 50017-2003, 《钢结构设计规范》[S]. 北京: 中国计划出版社, 2003.
[17]  GB 50017-2003, Code for design of steel structure [S]. Beijing: China Planning Press, 2003. (in Chinese)

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133