Wright J R, Cooper J E. Introduction to aircraft aeroelasticity and loads[M]. Chichester, England, Hoboken N J: John Wiley & Sons Ltd, 2007: 123-124.
[2]
Xie C C, Yang C. Linearization method of nonlinear aeroelastic stability for complete aircraft with high-aspect-ratio wings[J]. Science China Technological Sciences, 2011, 54(2): 403-411.
[3]
Fan R J, Feng Z H, Zhou Z. Static aeroelastic investigation of large aspect ratio UAV[J]. Chinese Quarterly of Mechanics, 2009(4): 548-554. (in Chinese) 范锐军, 冯朝辉, 周洲. 大展弦比无人机的静气弹问题计算及分析[J]. 力学季刊, 2009(4): 548-554.
[4]
Yang K M, Zhang W M, Wang B. Research of supercritical wing optimization based on aerodynamic design principle of wing[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(2): 263-272. (in Chinese) 杨昆淼, 张卫民, 王斌. 基于机翼气动设计准则的超临界机翼气动优化研究[J]. 航空学报, 2013, 34(2): 263-272.
[5]
Liu D Y, Wan Z Q, Yang C, et al. Aeroelastic optimizationdesign of global stiffness for high aspect ratio wing[J]. Acta Aeronautica et Astronautica Sinica, 2011, 32(6): 1025-1031. (in Chinese) 刘东岳, 万志强, 杨超, 等. 大展弦比机翼总体刚度的气动弹性优化设计[J]. 航空学报, 2011, 32(6): 1025-1031.
[6]
Guo H T, Lu B, Yu L, et al. Investigation on full-model flutter of a certain fighter plane in high-speed wind tunnel test[J]. Acta Aeronautica et Astronautica Sinica, 2012, 33(10): 1765-1771. (in Chinese) 郭洪涛, 路波, 余立, 等. 某战斗机高速全模颤振风洞试验研究[J]. 航空学报, 2012, 33(10): 1765-1771.
[7]
Yang C, Zhang B C, Wan Z Q, et al. A method for static aeroelastic analysis based on the high-order panel method and modal method[J]. Science China Technological Sciences, 2011, 54(3): 741-748.
[8]
Yun Q L. Experimental aerodynamics[M]. Beijing: National Defense Industry Press, 1991: 298-300. (in Chinese) 恽起麟. 实验空气动力学[M]. 北京: 国防工业出版社, 1991: 298-300.
[9]
De Leon J E,Winek G. Incorporating rapid prototyping into the engineering design curriculum[J]. Engineering Design Graphics Journal, 2009, 64(1): 18-23.
[10]
Hague R, Mansour S, Saleh N. Material and design considerations for rapid manufacturing[J]. International Journal of Production Research, 2004, 42(22): 4691-4708.
[11]
Yan Y N, Li S J, Zhang R J, et al. Rapid prototyping and manufacturing technology: principle, representative technics, applications, and development trends[J]. Tsinghua Science & Technology, 2009, 14(S1): 1-12.
[12]
Daneshmand S, Aghanajafi C, Ahmadi Nadooshan A. The effect of chromium coating in RP technology for airfoil manufacturing[J]. Sadhana, 2010, 35(5): 569-584.
[13]
Yang D G, Zhang Z Y, Sun Y, et al. A preliminary design and manufacturing study of hybrid lightweight high-speed wind-tunnel models[J]. Rapid Prototyping Journal, 2011, 17(1): 45-54.
[14]
Zhou Z H, Li D C, Zhang Z Y, et al. Design and fabrication of a hybrid surface-pressure airfoil model based on rapid prototyping[J]. Rapid Prototyping Journal, 2008, 14(1): 57-66.
[15]
Zhang W, Li D C, Zhao X L, et al. Fabrication and performance evaluation of micro-channels in aircraft wind-tunnel-models for pressure measurements using stereolithography[J]. Acta Aeronautica et Astronautica Sinica, 2011, 32(12): 2335-2340. (in Chinese) 张威, 李涤尘, 赵星磊, 等. 基于光固化快速成型技术的测压风洞模型孔道制造与性能评价[J]. 航空学报, 2011, 32(12): 2335-2340.
[16]
Sun Y, Zhang Z Y, Zhu W J, et al. Design method for photosensitive resin wind tunnel model considering elastic deformation[J]. Journal of Mechanical Engineering, 2011, 47(8): 169-174. (in Chinese) 孙岩, 张征宇, 朱伟军, 等. 考虑弹性变形的光敏树脂风洞模型设计方法[J]. 机械工程学报, 2011, 47(8): 169-174.
